Electromechanical Technician for Cryogenics - European Organization for Nuclear Research (Geneva)
About this position
The summary below is published by European Organization for Nuclear Research on the official vacancy notice. Our own analysis — salary realism, comparable openings, career trajectory, language profile — follows further down the page.
At CERN, the European Organization for Nuclear Research, physicists and engineers are probing the fundamental structure of the universe. Using the world's largest and most complex scientific instruments, they study the basic constituents of matter - fundamental particles that are made to collide together at close to the speed of light. The process gives physicists clues about how particles interact, and provides insights into the fundamental laws of nature.
Introduction
You will ensure the availability and reliability of CERN's cryogenic installations by providing daily technical support, maintaining industrial instrumentation systems and diagnosing complex electrical faults. You will also contribute to the design and optimisation of low-voltage electrical cabinets and components, in compliance with electrical safety standards.
Functions
- Contribute to the technical design and development of electrical cabinets for cryogenic systems, including the calculation to dimension the electrical systems, producing detailed electrical drawings, selecting components and ensuring compliance with electrical safety requirements. - Participate in and supervise the fabrication, installation…
Excerpt shown; read the full notice on the official page. The structured breakdown below covers the key facts.
Key responsibilities
According to the vacancy notice, the role centres on the following duties:
- Contribute to technical design and development of electrical cabinets for cryogenic systems, including calculation, electrical drawings, component selection, and compliance with electrical safety requirements
- Participate in and supervise fabrication, installation and commissioning of electrical and instrumentation systems for cryogenic installations
- Provide daily operational support for cryogenic installations and contribute to stand-by duty service to resolve urgent issues
- Plan and coordinate preventive and corrective maintenance activities for system components
- Select and implement industrial instrumentation systems and carry out equipment testing and calibration
Are you eligible?
Check these requirements from the notice before investing time in an application:
- Education: Technical certificate or general secondary education or equivalent relevant experience in Industrial Electrotechnics, Electrical and Instrumentation Technology, Electromechanics or a related field
- Experience: Experience in design of low-voltage electrical systems and cabinets; manufacture, wiring, testing, coordination of installation and commissioning of electrical equipment; diagnosing and resolving electrical or instrumentation faults in operational systems; preventive and corrective maintenance and maintaining technical documentation and procedures
- Languages: English (spoken…), French (spoken…)
- Key skills: Design and modelling of low-voltage electrical circuits and networks, Design of electromechanical systems, Operation and maintenance of electromechanical equipment and systems, Knowledge and application of instrumentation and measurement techniques, Electrical SEE CAD software, Managing Self, Solving Problems, Communicating Effectively, Working in Teams, Learning and Sharing Knowledge
- Eligibility: Applications from all Member States and Associate Member States welcome. Medical clearance required before contract offer. Valid driving licence required. Work in Radiation Areas and underground installations.
Contract and working arrangements
Contract duration: 5 years, with possibility to extend up to 8 years and eligibility for indefinite contract tenure.
Working arrangements: Fully Onsite.
Hiring unit: Cryogenic installations.
Position details
- Reference
- TE-CRG-IC-2026-176-LD
- Last Verified
- 7 August 2026
Position overview
This is the official EU Careers listing for Electromechanical Technician for Cryogenics at CERN based in Geneva (Contract Agent). The vacancy reference is TE-CRG-IC-2026-176-LD. The role falls under the Accounting/Auditing domain.
At CERN, the European Organization for Nuclear Research, physicists and engineers are probing the fundamental structure of the universe. Using the world's largest and most complex scientific instruments, they study the basic constituents of matter - fundamental particles that are made to collide together at close to the speed of light. The process gives physicists clues about how particles interact, and provides insights into the fundamental laws of nature.
Introduction
You will ensure the availability and reliability of CERN's cryogenic installations by providing daily technical support, maintaining industrial instrumentation systems and diagnosing complex electrical faults. You will also contribute to the design and optimisation of low-voltage electrical cabinets and components, in compliance with electrical safety standards.
Functions
- Contribute to the technical design and development of electrical cabinets for cryogenic systems, including the calculation to dimension the electrical systems, producing detailed electrical drawings, selecting components and ensuring compliance with electrical safety requirements. - Participate in and supervise the fabrication, installation and commissioning of electrical and instrumentation systems for cryogenic installations, including related procurement activities such as evaluating cost estimates and ordering component. - Provide daily operational support for cryogenic installations and contribute to the stand-by duty service to resolve urgent issues (including fault-finding, implementation of fixes, and reporting to the operation team). - Plan and coordinate preventive and corrective maintenance activities for system components, setting maintenance priorities and keep the corresponding technical documentation and procedures up to date. - Select and implement industrial instrumentation systems and carry out equipment testing and calibration according to operational requirements.
Technical certificate or general secondary education or equivalent relevant experience in the field of Industrial Electrotechnics, Electrical and Instrumentation Technology, Electromechanics or a related field.
Experience:
- Experience in the design of low-voltage electrical systems and cabinets, including system architecture, cable and protection sizing, device selection and preparation of wiring diagrams, using electrical SEE CAD software. - Experience in the manufacture, wiring, testing, coordination of installation and commissioning of electrical equipment. - Experience in diagnosing and resolving electrical or instrumentation faults in operational systems. - Experience in preventive and corrective maintenance and in maintaining technical documentation and procedures.
Technical competencies:
- Design and modelling of low-voltage electrical circuits and networks. - Design of electromechanical systems. - Operation and maintenance of electromechanical equipment and systems. - Knowledge and application of instrumentation and measurement techniques,ideally in a process or cryogenic environment.
Behavioural competencies:
- Managing Self: working well autonomously; taking on activities and tasks without prompting. - Solving Problems: finding the information needed to solve problems; making objective judgements based on all the facts available. - Communicating Effectively: delivering presentations in a structured and clear way; adjusting style and content to the audience; responding calmly and confidently to questions. - Working in Teams: contributing to promoting a positive atmosphere in the team through an optimistic and constructive attitude; addressing issues. - Learning and Sharing Knowledge: sharing knowledge and expertise freely and willingly with others; coaching others to ensure knowledge transfer.
Language skills:
Spoken and written English or French, with a commitment to learn the other language.
Eligibility and closing date:
Diversity has been an integral part of CERN's mission since its foundation and is an established value of the Organization. Employing a diverse workforce is central to our success. We welcome applications from all Member States and Associate Member States.
This vacancy will be filled as soon as possible, and applications should normally reach us no later than 06.09.2026 at 23:59 CEST.
Employment Conditions
Contract type: Limited duration contract (5 years). Subject to certain conditions, holders of limited-duration contracts may apply for an indefinite position.
Working Hours: 40 hours per week
Job Flexibility: Fully Onsite
This position involves:
- Participation in a regular stand-by duty, including nights, Sundays and official holidays. - Work in Radiation Areas. - Interventions in underground installations. - A valid driving licence. - Exposure to electromagnetic fields under certain conditions. - Given the occupational health risks associated with this position, the selected candidate must obtain medical clearance before a contract offer is confirmed.
Job grade: 3-4
Job reference: TE-CRG-IC-2026-176-LD
Field of work: Mechanical Engineering
Benchmark Job Title: Electromechanical Technician
Global Benefits
- A competitive salary(tax free), increasing in line with your years of relevant experience. - 30 days of paid leave per year plus 2 weeks annual closure. - Coverage by CERN’s comprehensive health insurance scheme (for yourself, your spouse and children), and membership of the CERN Pension Fund. - Family, child and infant monthly allowances depending on your individual circumstances. - A relocation package (installation grant, removal, travel expenses) depending on your individual circumstances. - Possibility to extend your contract up to 8 years + eligibility for indefinite contract tenure.
Overview of CERN -Discover a world where the impossible is made possible!
At CERN, the European Organization for Nuclear Research, we are pushing the frontiers of science and technology. Our groundbreaking work brings together not only physicists but also a diverse range of professionals from engineering, technical, scientific, and administrative fields. Together, we foster an environment where innovation and collaboration thrive.
Every day, we face exciting new challenges and opportunities to contribute to cutting-edge research that shapes our understanding of the universe. We meet these challenges through the diverse perspectives within our teams, ensuring every contribution is valued and driving our shared sense of inclusion and purpose. Diversity is a core value of CERN since its foundation, and it remains central to our mission and continued success.
If you are ready to be part of a dynamic, inclusive community pushing the boundaries of knowledge, CERN is the place where your curiosity and skills can thrive. Be part of our mission to uncover what lies at the heart of the universe!TAKE PART!
More information about us, here:careers.cern
Application timeline
This vacancy was first listed on 7 August 2026, today.
No closing date is published in the source feed for this position. EU vacancies typically remain open for four to eight weeks; check the official vacancy notice for the cut-off date and time.
Last verified against the EU Careers feed on 7 August 2026.
Where to learn more
For headcount, mission, and other open vacancies at CERN see the CERN institution page; for the cost of living, correction coefficient, and other postings in Geneva see our Geneva location page; for related vacancies in the Accounting/Auditing field browse our Accounting/Auditing domain page.
New to EU careers? Our beginner's guide walks through entry routes, EPSO competitions, and what to prepare. For application logistics see application tips and EPSO competitions.
Career trajectory
Language profile
Application cadence
Visit the official European Organization for Nuclear Research website
Source: This job listing was sourced from the officialEU Careers portal (EPSO). First published: .